Setting Modem ADSL / Speedy

Setting Modem Speedy : Tp-Link, Dlink, Corega, linksys, Aztech , Sanex, Shiro, BARAA100V2, Zyxel dll…
TP-LINK TD-8811
Default IP: 192.168.1.1
Default username : admin
Default password : admin
Setting Bridge
1. Pilih Advanced Setup
2. Pilih WAN
3. Cari VPI/VCI: 8/81, klik Edit
4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Centang Enable Bridge Service, Service Name: Speedy, Next
7. WAN Setup – Summary, Save
8. Save/Reboot
Setting PPPoE
1. Pilih Advanced Setup
2. Pilih WAN
3. Cari VPI/VCI: 8/81, klik Edit
4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Masukkan PPP Username: (Nomorspeedy@telkom.net); PPP Password: (Password speedy); PPPoE Service Name: Speedy, Next
7. Centang Enable WAN Service, Service Name: Speedy, Next
8. WAN Setup – Summary, Save
9. Save/Reboot

Aztech
Default IP: 192.168.1.1
Default username : admin
Default password : admin
Setting Bridge
1. Pilih Advanced
2. Pilih WAN
3. Klik New Connection
4. Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, (yang lain jangan ada yang dirubah sesuai default aja), Submit
5. Save Settings
6. Restart Router
Setting PPPoE
1. Pilih Advanced
2. Pilih WAN
3. Klik New Connection
4. Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: (Nomorspeedy@telkom.net), Password: (Password speedy), VPI: 8, VCI: 81, (yang lain jangan ada yang dirubah sesuai default aja), Submit
5. Save Settings
6. Restart Router
Modem ADSL Corega.

1. Pastikan modem tersambung dengan benar.
2. Ubah IP komputer anda dengan 192.168.1.2/24 (tahu kan /24 itu untuk submask)
3. Buka Mozilla atau IE
4. Ketik di address 192.168.1.1
5. Username : root password :
6. Klik wizard
7. Pilih negara: Indonesia kemudian pilih TELKOM 4
8. Klik config
9. Klik New Connection
10. Tuliskan nama koneksi yang baru
11. Pilih PPOE
12. Untuk VCI, VPI tanya ke telkom, klo untuk Rembang pakai VCI : 8, VPI : 81
13. Masukkan username : xxxxxxxxxxxx@telkom.net
14. Masukkan password speedy anda.
15. Klik Apply
16. Klik Connect
17. Klik Apply
18. Klik Save All
19. Jadi deh….
Troubleshotting
Klo masih ga konek setelah langkah diatas silahkan anda restart komputer yang dibuat nyeeting.
Demikian Semoga bermanfaat.

BARAA100V2

Fitur:
– Single port ethernet/LAN
– AC Adaptor 12V
– Setting mudah, murah
– info : http://www.corega-asia.com

Cara setting :
1. Koneksi PPPoE (modem nyala speedy langsung konek)
http://192.168.1.1
– username: admin
– password: 1234
Pilih Interface Setup di menu bar
– ISP:PPPoA/PPPoE
– Masukkan username dan password speedy kamu..
– VPI dan VCI: isi sesuai daerah kamu (cek di sini)
– Save
lihat di bawah ini:

2. Koneksi Dial-up / Bridge (koneksi ala telkomnet instan)
Persis sepeti koneksi PPPoE diatas cuman rubah pilihan ISP:Bridge Mode
Lihat contoh dibawah ini:

3. Pilih Menu Maintenance
– Klik current settings
– RESTART

4. Silahkan dicoba..
Tecom

Tecom AR1031

Default IP: 192.168.1.1
Default username : admin
Default password : admin

Setting Bridge
1. Pilih Advanced Setup
2. Pilih WAN
3. Klik Edit
4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Centang Enable Bridge Service, Service Name: Speedy, Next
7. WAN Setup – Summary, Save
8. Save/Reboot

Setting PPPoE
1. Pilih Advanced Setup
2. Pilih WAN
3. Klik Edit
4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Masukkan PPP Username: (Nomorspeedy@telkom.net); PPP Password: (Password speedy); PPPoE Service Name: Speedy, Next
7. Centang Enable WAN Service, Service Name: Speedy, Next
8. WAN Setup – Summary, Save
9. Save/Reboot

D-Link
DSL-302T

Default IP: 192.168.1.1
Default username : admin
Default password : admin

Setting Bridge
1. Pilih Setup
2. Pilih Connection
3. Bridge Connection Setup. Name: Speedy; Type: Bridge; Encapsulation: LLC; VPI=8; VCI=81, Apply
4. Pilih Tools
5. Pilih System Commands, Save All, Restart

Setting PPPoE

1. Pilih Setup
2. Pilih Connection
3. Bridge Connection Setup. Name: Speedy; Type: PPPoE; Username: (Nomorspeedy@telkom.net); Password: (Password speedy); VPI=8; VCI=81, Apply
4. Pilih Tools
5. Pilih System Commands. Save All, Restart

SMC

Default IP: 192.168.2.1
Default password: smcadmin

Linksys

Linksys AM300

Default IP: 192.168.1.1
Default username : admin
Default password : admin

Setting Bridge
1. Pilih Setup
2. Pilih Basic Setup
3. ADSL Settings, Encapsulation: RFC 1483 Bridged, Autodetect: Disable, VPI: 8, VCI: 81, Multiplexing: LLC, DSL Modulation: Auto
4. Pilih Save Settings

Setting PPPoE
1. Pilih Setup
2. Pilih Basic Setup
3. ADSL Settings, Encapsulation: RFC 2516 PPPoE, Autodetect: Disable, VPI: 8, VCI: 81, Multiplexing: LLC, DSL Modulation: Auto
4. PPPoE Settings: Username: (Nomorspeedy@telkom.net), Password: (Password speedy), Keep Alive
5. Pilih Save Settings

Dareglobal

Default IP: 192.168.1.1
Default username : admin
Default password : admin

Setting Bridge
1. Pilih Advanced Setup
2. Pilih WAN
3. Cari VPI/VCI: 8/81, klik Edit
4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Centang Enable Bridge Service, Service Name: Speedy, Next
7. WAN Setup – Summary, Save
8. Save/Reboot

Setting PPPoE
1. Pilih Advanced Setup
2. Pilih WAN
3. Cari VPI/VCI: 8/81, klik Edit
4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Masukkan PPP Username: (Nomorspeedy@telkom.net); PPP Password: (Password speedy); PPPoE Service Name: Speedy, Next
7. Centang Enable WAN Service, Service Name: Speedy, Next
8. WAN Setup – Summary, Save
9. Save/Reboot

Shiro
Shiro DSL805E

Default IP: 192.168.1.1
Default username : admin
Default password : admin

Setting Bridge
1. Pilih Advanced
2. Pilih WAN
3. Klik New Connection
4. Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, (yang lain jangan ada yang dirubah sesuai default aja), Submit
5. Save Settings
6. Restart Router

Setting PPPoE
1. Pilih Advanced
2. Pilih WAN
3. Klik New Connection
4. Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: (Nomorspeedy@telkom.net), Password: (Password speedy), VPI: 8, VCI: 81, (yang lain jangan ada yang dirubah sesuai default aja), Submit
5. Save Settings
6. Restart Router

Level One

Default IP: 192.168.1.254
Default username: admin
Default password: password

Zyxel
ZyXEL P-660R

Default IP: 192.168.1.1
Default username : admin
Default password : 1234

Setting Bridge
1. Pilih Network
2. Pilih WAN
3. Mode: Bridge, Encapsulation: RFC 1483, Multiplexing: LLC, VPI: 8, VCI: 81, Apply
4. Pilih Maintenance
5. Pilih Tools
6. Restart

Setting PPPoE
1. Pilih Network
2. Pilih WAN
3. Mode: Routing, Encapsulation: PPPoE, Username: (Nomorspeedy@telkom.net), Password: (Password speedy), Service Name: Speedy, Multiplexing: LLC, VPI: 8, VCI: 81, IP Address: Obtain an IP Address Automatically, Connection: Nailed-Up Connnection, Apply
4. Pilih Maintenance
5. Pilih Tools
6. Restart

Iklan

Satu Tanggapan to “Setting Modem ADSL / Speedy”

  1. Tx banget atas infonya brooo,smoga dapat membantu

Tinggalkan Balasan

Isikan data di bawah atau klik salah satu ikon untuk log in:

Logo WordPress.com

You are commenting using your WordPress.com account. Logout / Ubah )

Gambar Twitter

You are commenting using your Twitter account. Logout / Ubah )

Foto Facebook

You are commenting using your Facebook account. Logout / Ubah )

Foto Google+

You are commenting using your Google+ account. Logout / Ubah )

Connecting to %s

%d blogger menyukai ini: